BTQWC - N-VINYLPYRROLIDONE, 367-368

Product Identification

Product ID:N-VINYLPYRROLIDONE, 367-368
MSDS Date:01/01/1991
FSC:6810
NIIN:00N047329
MSDS Number: BTQWC

Responsible Party
SCIENTIFIC POLYMER PRODUCTS INC
6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Contractor
SCIENTIFIC POLYMER PRODUCTS INC
ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MWG0

Ingredients

N-VINYLPYRROLIDONE/VINYL ACETATE COPOLYMER

CAS: 25086-89-9

Fraction By Weight: 50%

OSHA PEL N/K

ACGIH TLV: N/K


ISOPROPYL ALCOHOL; (ISOPROPANOL)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 50%

OSHA PEL 400 PPM;500 STEL

ACGIH TLV: 400 PPM;500 STEL

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:@400 PPM AND ABOVE IRRITATION OF NOSE
AND THROAT MAY OCCUR.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MED ASSISTANCE.
INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN MOUTH TO
MOUTH. EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
AFFECTED AREA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING. INGEST:
CALL MD IMMED .

Fire Fighting

Flash Point Method:TCC
Flash Point:53.0F,11.7C
Lower Limits:2%
Upper Limits:12.7@200F
Extinguishing Media:CO*2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FUMES MAY SPREAD LONG DISTANCES AND BE
IGNITED.

Accidental Release

Spill Release Procedures:GET ALL WORKERS OUT OF SPILL AREA. PUT ON A
NIOSH/MSHA APPROVED RESPIRATOR AND OTHER PROTECTIVE CLOTHING.
SPREAD SAND/OTHER ABSORBENT MATERIAL OVER LIQUID TO ABSORB IT.
SHOVEL INTO BUCKETS AND REMOVE TO OPEN AIR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:GOOD HYGIENE PRACTICES SHOULD BE
STRICTLY FOLLOWED. PROVIDE ADEQUATE VENTILATION.
Other Precautions:MATL SHOULD BE KEPT IN A CLSD CONTR TO PREVENT
EXCESSIVE MOISTURE PICKUP, PROTECT CONTAINERS FROM DAMAGE, STORE
AWAY FROM HEAT, & FLAME. NOTE: THIS MATL IS INTENDED FOR LAB USE
ONLY. IT IS NOT SOLD/IN TENDED FOR DRUG, HOUSEHOLD/OTHER USES.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF NEEDED.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS BUTYL RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:181F,83C
Vapor Pres:33@20C
Vapor Density:2.1
Spec Gravity:0.955
Evaporation Rate & Reference:MODERATE
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID; ALCOHOL, ACETONE-LIKE ODOR
Percent Volatiles by Volume:50

Stability

Stability Indicator/Materials to Avoid:YES
CONCENTRATED NITRIC AND SULFURIC ACIDS, STRONG OXIDIZERS, ALDEHYDES,
HALOGENS AND HALOGEN COMPOUNDS.
Stability Condition to Avoid:HEAT, FLAME, OR SOURCES OF IGNITION.
Hazardous Decomposition Products:MAY PRODUCE CARBON MONOXIDE AND/OR
CARBON DIOXIDE.

Disposal

Waste Disposal Methods:CONTACT FOR FINAL DISPOSAL YOUR REGIONAL OFFICE
AT THE DEC. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.